 |
|
|
Microm HM520
.
- Cryostat housing can be moved by means of steering rollers that can be fixed.
- Retractable handle on the front side of the cryostat for easy transportation.
- Spacious stainless steel cryo chamber with even surfaces and drain system, easy to clean and disinfect.
- Temperature control of the cryo chamber continuously from +5° to -30°C (HM 525: +5º to -35ºC).
- Storage possibility for labelled slides as well as for staining cuvettes on top of the cryostat.
- Large storage shelves inside the cryo chamber for additional chucks and heat extractor.
- Electronical control via touchpad keyboard for the setting of all parameters, e.g. section thicknesses and temperatures.
- Indication of preset and actual temperature.
- Programmable "memory” function for the fast, automatic finding of the first cut position.
- Automatic 24-h-defroster with additional interrupt key.
- Active fast freezing device with max. 27 stations down to -35°C for the storage of chucks (4 Peltier supported stations up to -60ºC on HM 525).
- Heated sliding window.
- Removable section waste tray and brush shelf.
- Cold-light lamp for cryo chamber with separate on/off switch.
- Rotary microtome with backlash and maintenance free cross roller bearings in stainless steel with slot cover.
- Specimen retraction with return travel.
- Feed system via precise stepping motor technology.
- Settings from outside via ergonomical touchpad keyboard
.
- Section thickness setting from 2 µm up to 500 µm (1 µm up to 500 µm on HM 525), divided into fine section thicknesses and trimming thicknesses.
- HM520 Section thickness setting of the fine sections
- from 2 up to 22 µm
- up to 10 µm in 1 µm-increments
- from 10 up to 22 µm in 2 µm-increments
- HM 525 Section thickness setting of the fine sections
- from 1 up to 20 µm
- up to 10 µm in 1 µm-increments
- from 10 up to 20 µm in 2 µm-increments.
- Section thickness setting of trimming sections
- from 10 up to 500 µm
- from 10 up to 80 µm in 10 µm-increments
- up to 300 µm in 50 µm-increments
- up to 500 µm in 100 µm-increments
- Horizontal feed range 28 mm.
- Vertical specimen stroke 60 mm.
- Motorized coarse feed.
- LED-display for section counter, sum of section thicknesses and remaining travel for front end position.
- Specimen orientation in X/Y-axes 8° in either direction and specimen rotation on Z-axis.
- "Zero positioning" of the chuck for easy parallel alignment of the chuck towards the blade.
- Max. specimen size 70 x 55 mm.
- Smooth running handwheel that can be locked.
- Weight: 143 kg
Call to speak with our friendly associates
for a quote request or more info:
Telephone: 760-295-1842
Fax: 760-295-1850
TOLL FREE: 866-429-0618 (BACK) |
